Insight into water quality
An instantaneous water sampling, also known as a grab sample, provides insight into water quality at a specific moment. This method is widely used for surface water, wastewater, drainage water, and drinking water.
The quality of an analysis stands or falls with the quality of the sampling. If a sample is not taken correctly, analysis results can provide a distorted picture of the actual situation. That is why it is important that sampling is carried out according to established procedures and by experienced specialists.
With professional sampling, you have reliable data for permits, operating conditions, environmental monitoring, and quality controls.
Instant sampling
With instant sampling, water is sampled directly on-site. Depending on the situation, this is done, for example, by holding a sample bottle under a faucet, pump outlet, or discharge point, or by taking a sample from surface water.
Our experts have various sampling tools at their disposal to apply the right method for every situation.
All work is carried out in accordance with applicable WAK procedures and quality guidelines.
Normec provides, among other services:
-
1.
Wastewater sampling
-
2.
Sampling of surface water
-
3.
Sampling of drainage water
-
4.
Sampling of drinking water
-
5.
In-situ measurements of relevant parameters
-
6.
Transport of samples to the laboratory
-
7.
Analysis and reporting of results
Reliable results
Proper sample collection is the foundation of reliable analyses. That is why our specialists pay close attention to the correct collection, preservation, and processing of samples.
Here’s what this means for your organization:
- You have access to representative water samples
- You receive reliable analysis results
- You comply with permits and legal obligations
- You benefit from a single point of contact for the entire process
- You receive clear and actionable reports
After sampling, the samples are analyzed in Normec’s accredited laboratory. This ensures that sampling, analysis, and reporting are seamlessly integrated.
Experienced specialist in water sampling
Normec is an accredited and independent laboratory with years of experience in water research, environmental analysis, and sampling.
Our staff are trained to collect water samples according to proper procedures and possess the knowledge and equipment to perform a wide range of sampling tasks.
Customers choose Normec because of:
- ISO 17025-accredited analyses
- Working according to recognized WAK procedures
- Experienced and trained samplers
- Modern sampling equipment
- A single partner for sampling, analysis, and reporting
Prepared for future requirements
Companies and government agencies are increasingly required to demonstrate compliance with applicable standards and regulations. With professional water sampling, you have access to reliable data for monitoring, reporting, and inspections. This ensures compliance with current regulations and prepares you for future developments in water management and environmental protection.
Would you like to learn more about water sampling?
Frequently Asked Questions
-
A grab sample is an instantaneous water sample taken at a specific moment. It provides a snapshot of water quality.
-
Normec takes samples of surface water, wastewater, drainage water, and drinking water, among others.
-
This method is used when an immediate assessment of water quality is needed or when permits and regulations require a snapshot.
-
Yes. During sampling, our specialists can perform various in-situ measurements, depending on the research question.
-
The sample is transported to the laboratory under controlled conditions for further analysis.
-
The reliability of the analysis results depends directly on the quality of the sampling. An incorrect sample can lead to incorrect conclusions.
-
Yes. Normec handles sampling, laboratory analysis, interpretation of results, and reporting as part of a single integrated service.